Here two PCBs file need to combine one PCB file, it will save much setup fee for prototype.How to build one PCB file with different PCBs in Allegro?
Below is the second PCB.
We create a new PCB module.and select follow the red circle.
Save the module with mdd.then copy the second PCB into the first PCB.
The first PCB select like below:
Then you can see we combined the second pcb into the first PCB through place component method, you need named it when place the new module.after that every legend stick up the name,so we can use below method to solve this problem.
In the second PCB,save the silkscreen layer with correct format.
Input the correct silkscreen layer into the first PCB.
Then the silkscreen is perfect now.
This artcle from PCB_technique. more questions please contact us: www.kingsunpcb.com
High-frequency PCB and high-speed signal transmission lines should avoid routing at 90 degree corners, which…
Solder defects often delay new product launches,What factors will affect the poor soldering of the…
Why PCB Thermal management is important? For electronic devices, a certain amount of heat will be generated during…
The factors that cause the welding defects of flexible circuit boards have the following three…
How to choose how many layers of boards are used for design and how to…
When the PCB design is completed, the laminate layer is determined, and the PCB board…