LED lighting PCB is mainly based on aluminum substrate,The aluminum base circuit board is a unique metal based copper clad plate. It has good thermal conductivity, electrical insulation and machinability.
Characteristics of aluminum base circuit board:
Structure of aluminum based circuit board
Aluminum based copper clad plate is a metal circuit board material consisting of copper foil, thermal insulation layer and metal substrate. Its structure is divided into three layers:
Circult layer: the copper clad plate equivalent to the ordinary PCB. The thickness of the line copper foil is from 1OZ to 10OZ.
Dielectric Layer: the dielectric layer is a layer of low thermal resistance and heat conduction insulating material. Thickness: 0.003 “to 0.006” inches is the core technology of aluminum based copper clad laminate which has obtained UL certification.
Base Layer: It’s a metal substrate, usually aluminum or copper. Aluminum based copper clad plate and traditional epoxy glass cloth laminates and so on.
The circuit layer (copper foil) is usually etched to form a printed circuit, so that all components of the components are interconnected. In general, the circuit layer requires great current carrying capacity. Therefore, thick copper foil should be used and the thickness is from 35 μm~280 μm.The thermal conductive insulating layer is the core technology of aluminum substrate. It is generally made up of special polymers filled with special ceramics. It has small thermal resistance, excellent viscoelasticity and thermal aging resistance, and can withstand mechanical and thermal stresses.King Sun was using this technology of aluminum substrate, so that it has excellent thermal conductivity and high strength electrical insulation performance.The metal base is a supporting member of aluminum substrate, with high thermal conductivity, usually aluminum, can also use copper (copper which can provide better thermal conductivity), suitable for drilling, punching, cutting and other conventional mechanical processing.
Use of aluminum based circuit board
High-frequency PCB and high-speed signal transmission lines should avoid routing at 90 degree corners, which…
Solder defects often delay new product launches,What factors will affect the poor soldering of the…
Why PCB Thermal management is important? For electronic devices, a certain amount of heat will be generated during…
The factors that cause the welding defects of flexible circuit boards have the following three…
How to choose how many layers of boards are used for design and how to…
When the PCB design is completed, the laminate layer is determined, and the PCB board…